SIGMAPROBE "Safety Design" Introduction

SIGMAPROBE "Safety Design" Introduction

Why is Safety Important during Circuit Testing?

Why Choose SIGMAPROBE circuit tester For Excellent Safety Performance? Troubleshooting electrical problems is a frustrating task for most mechanics, the most electrical problems are caused by low voltage (or no voltage), excessive resistance, or a loss of continuity.

But the fact is that we might often meet the problem caused by accidentally shorting out a hot circuit and damaging the wiring, PCM, or other onboard electronics, or starting a fire during the automotive electrical systems test & repair processing.

Therefore, safety is always an important consideration when working on automotive electrical systems. It's not only electrical system safety but also considering the circuit tester & mechanic‘s operating safety moreover.

That's why we want offer you—— SIMGAPROBE CIRCUIT TESTER

How does the SIGMAPROB circuit tester guard working safety during circuit testing?

How does the SIGMAPROB circuit tester guard working safety during circuit testing?

"SAFETY POWER SUPPLY"

The 0-5V power supply function prevents your component be damaged by voltage when testing it, airbag sensor.
It is useful when checking the wiring to the ECU/ECM. After you check the sensor with a Multimeter, if there is still a problem, you can simulate the voltage output by the sensor to verify the wiring to the ECU.

"SAFETY POWER SUPPLY"

 

"WIDE RANGE MEASUREMENT VOLTAGE"

"9-30V working voltage"

SIGMAPROBE circuit tester Support 9-30V working voltage, not only make the SIGMAPROBE application for Motorcycles, Cars, Trucks, RVs & Boats.
Also, prevent the circuit tester will not be damaged by high voltage.

"9-30V working voltage"

 

“SOLID WIRE WITH HIGH QUALITY ”

"70mm Copper Core" & "Alligator Clip with Whole Wrapped“

"70mm Copper Core" & "Alligator Clip with Whole Wrapped“

"70mm Copper Core" & "Alligator Clip with Whole Wrapped“

 

SIGMAPROBE circuit tester with 6 Meters strong test cable which comes with 70mm copper core for more amp Current load.
Avoid high-temperature heating during the test process to cause the wire to burn.

Alligator clip with whole wrapped, more safety for technician work.

Alligator clip with whole wrapped, more safety for technician work.

"Double Insurance"

1. Short-Circuit Automatic Protection

If current overloaded, its internal circuit breaker system will automatically tip for protection. The circuit breaker monitors this tool at all times. As an essential safety measure to prevent overload, it is a very practical function.

Short-Circuit Automatic Protection

2. Fuse Protection

Equipped with a 25 amp fuse in the auxiliary grounding lead, which can be protected when the device is short-circuited or overloaded.

Fuse Protection
With the hybrid car more and more popular, how to check those kinds of vehicles come with a high voltage battery electrical problems need better solution urgently.
how to check the voltage & resistance problem safely is more & more important now.
If you need those solutions, the SIGMAPROBE circuit tester is here now.